someone help! i have hardware conflicts!
You probably have a hardware mis-configuration, drives set or jumpered wrong. Optical drives with the wrong cable, maybe bad memory, try running memtest. Memory in the wrong slots. Start over with 1 HD, 1 optical drive, 1 stick of memory and 1 floppy drive. Set each drive as a master, one on each IDE controller. You might also try the card in a different slot, the slots share IRQ with the other hardware on the board, that info should be in your manual.
Good luck
__________________
Dave
Is a computer virus a terminal illness?
Abit IP35 PRO, 2G Corsair XMS 6400Pro, OCZ 700W PS, Evga 9600GT, Seagate Sata2 drives raid 0,
Soyo KT-400,2400XP Antec 430W Tru Power, ATI 9000, 1G Corsair,DVD-ROM,On board sound and Lan
|