 |
 |
21-07-08, 12:10 PM
|
|
N00B
|
|
Join Date: Jul 2008
Posts: 2
|
|
P4M800Pro: Can`t install AGP Driver in Win Me
Can`t install AGP Driver in Win Me. MB: ECS P4M800Pro-M478.Please help
|
21-07-08, 03:58 PM
|
 |
Moderator
|
|
Join Date: Jan 2002
Location: Southern California
Posts: 8,244
|
|
That board may not support Win ME. Time to upgrade. Chris.
__________________
1) KN9 SLI, AMD X2 6400+, 2Gb OCZ 6400, EVGA GTX260 896Mb, 320Gb + 160Gb SATA II, LG Lightscribe, 600w CM, XP Pro SP2/ Vista Home Premium
2)AX78, Phenom 9500, 2Gb OCZ PC6400, XFX 8400, CDRW, XP Pro SP2
3)AX78, Phenom 9500, 2Gb OCZ PC6400, EVGA 8800GT/SC, CDRW, XP Pro SP2
4)AX78, Phenom 9600, 2Gb OCZ PC6400, EVGA 8800GTS, CDRW, XP Pro SP2.
5)AX78, Phenom 9600, 2Gb OCZ PC6400, EVGA 7100, CDRW/DVD, XP Pro SP2.
http://www.viaarena.com/default.aspx?PageID=2VIA Drivers
|
21-07-08, 04:36 PM
|
|
N00B
|
|
Join Date: Jul 2008
Posts: 2
|
|
But why IDE and INF drivers are installing well? Device manager doesn't find "CPU to AGP controller" only
|
22-07-08, 03:19 PM
|
 |
Titanium Member
|
|
Join Date: Jan 2003
Posts: 8,460
|
|
Quote:
Originally Posted by DeeCee
But why IDE and INF drivers are installing well? Device manager doesn't find "CPU to AGP controller" only
|
As what Chris mention, most likely this mobo doesn't support win me, tbh....nowsaday ppl seldom use win me, looking at ur mobo manufacturer web site, most of it's driver are mean for win 2000, xp, 2003 etc, it didn't even mention win me.
Grab urself xp or 2k and i'm pretty sure ur issue would be resolved in no time |
22-07-08, 04:52 PM
|
|
Moderator
|
|
Join Date: Jan 2002
Location: Southern California
Posts: 8,244
|
|
Try this driver then: VIA Arena - Display Drivers Chris.
__________________
1) KN9 SLI, AMD X2 6400+, 2Gb OCZ 6400, EVGA GTX260 896Mb, 320Gb + 160Gb SATA II, LG Lightscribe, 600w CM, XP Pro SP2/ Vista Home Premium
2)AX78, Phenom 9500, 2Gb OCZ PC6400, XFX 8400, CDRW, XP Pro SP2
3)AX78, Phenom 9500, 2Gb OCZ PC6400, EVGA 8800GT/SC, CDRW, XP Pro SP2
4)AX78, Phenom 9600, 2Gb OCZ PC6400, EVGA 8800GTS, CDRW, XP Pro SP2.
5)AX78, Phenom 9600, 2Gb OCZ PC6400, EVGA 7100, CDRW/DVD, XP Pro SP2.
http://www.viaarena.com/default.aspx?PageID=2VIA Drivers
|
22-07-08, 08:10 PM
|
|
Gold Member
|
|
Join Date: Aug 2004
Location: Kalifornia
Posts: 1,572
|
|
Quote:
Originally Posted by Mr. Chris
That board may not support Win ME. Time to upgrade. Chris.
|
The primary reason that newer motherboards could not support an older operating system like 98/ME are the lack of 98/ME drivers for newer hardware devices. Since VIA has 98/ME drivers for all VIA devices on this board, its a non-issue.
The secondary (and less significant) reason is the newer ACPI BIOS support that an older operating system couldn't properly decode. This can usually be solved by disabling APIC support in BIOS, while leaving ACPI enabled. Note the difference between A-P-I-C and A-C-P-I:
APIC = Advanced Programmable Interrupt Controller
ACPI = Advanced Configuration and Power Interface
If there are still problems, try disabling both ACPI and APIC in BIOS, leaving only APM enabled (if available). Many modern BIOS still have legacy support for good-old PNP BIOS 1.0a and APM 1.2 supported by 98/ME. In fact, ECS states precisely this in the specifications.
The 98/ME AGP driver from the Hyperion Pro package is correct for the VIA P4M800PRO. There is some reason that the AGP driver is not installing or functioning correctly, and it is not because the motherboard is "too new" (an old chipset doesn't get newer just because you put it on a newer motherboard).
What are the rest of your hardware specs (e.g. RAM, CPU, et. al.)? Are you receiving any error messages?
"Can't install driver" is not enough information about your problem.
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
|
 |
|
