DVI Probs Pico PX

FOKUStech · #1 (**permalink**) 21-10-08, 09:01 AM

I have massive Problems with the DVI Interface. We can't use the DVI Display in single mode. I have all BIOS settings tested. If i use DVI solo setting in BIOS, all tested panels are out of rage or modul will set in CRT/LCD modus automatically. There is no LCD/DVI modus available!
In Windows I can use the DVI interface just as secondary monitor, not as first.
BIOS Version is 1.04
Somebody knows something about these problems?

boyblue · #2 (**permalink**) 21-10-08, 09:29 AM

FOKUStech

So you are saying if you connect the LCD DVI to the board and boot up it comes up with that error.

"In Windows I can use the DVI interface just as secondary monitor, not as first.", so what other monitor is connected at the same time.

FOKUStech · #3 (**permalink**) 21-10-08, 10:33 AM

Update:

With a new VIA driver I can set the DVI Panel as first and only.
But on booting the PC, the panel says "Out of Range", so I can't go into BIOS. At the moment windows shows his blue welcome screen tft-panel goes in normal mode!