Epia MII 12000 power

[titoy]

Hello,</p>



</p>



I'm building a mini-pc based on an EPIA MII 12000, 512 Mb RAM,
small 10Go 2.5" HDD, DVD/CDRW SLIM combo.</p>



All this is embedded in a TRAVLA C138 case, with 60W DC/DC
power.</p>



</p>



I've wired all the things, and made my 1st power test! Nothing
happened. No power light, no hdd, no fan moving!</p>



</p>



I've then removed HDD and DVD, checked all connections, and
started again...nothing appears.</p>



</p>



When I push the power button, sometime the power led briefly
blink ,so briefly that first I did not notice it!</p>



</p>



I'm wondering if the 60w power supply of the Travla is enough?
Can anyone give advice? Any similar experience? (I've seen some
with MII 10000)</p>



</p>



Thanks for u're help.</p>



</p>



</p>

[titoy]

Oups I made a mistake, the Travla case I have seems to have a 120W PSU. Hence I really have to check it!

[titoy]

I made a test with a 300 ATX PSU from regular PC. Works fine,
but the system FAN never start. So as for now on, it seems that my
Via Epia MII12000 is OK, and the Travla is not! I boot this with a
Linux Live CD to perform test. Seems working properly. Now my only
problem is to understand why the Travla case PSU does not work, but
this is out of the scope of this forum.</p>