PWB-M120 input spec

davens · #1 (**permalink**) 26-06-08, 06:37 PM

The PWB-M120 spec has the input voltage as 12~24V which led me to believe this is a range. However, I'm interpretting nominal ranges of 12 +/- 0.6V and 24 +/- 1.2V. Can this be run at any other voltages inbetween? Does it need to be a regulated 12/24V or can a hefty enough wall-wart work?

davens · #2 (**permalink**) 11-07-08, 07:35 PM

response from VIA: operates in range 12V to 24V. Right now I'm running it off a 3A 12V supply (probably barely powerful enough, but is working fine). I haven't tried direct off an alternator yet which I think is ~14V with lots of noise.

wazza · #3 (**permalink**) 10-08-08, 11:51 AM

Quote:

Originally Posted by davens

The PWB-M120 spec has the input voltage as 12~24V which led me to believe this is a range. However, I'm interpretting nominal ranges of 12 +/- 0.6V and 24 +/- 1.2V. Can this be run at any other voltages inbetween? Does it need to be a regulated 12/24V or can a hefty enough wall-wart work?

Ok suspect that like most dual voltage Items that they are in 12 or 24 and not in between as on a slider
stick to your nominals